...all of the mods help, but there's a reason I went with the drawer liner and K240 foam coupled with the right amp and tube selection. With that,...
For glare or other slight treble issues, you can try some drawer liner over the silver mesh and under the foam. Try K240 foam too. It helps. Make...
...of the thread, and I think you'll have everything you need. Drawer liner does slightly boost bass, but just slightly. It does smooth out the...
Looks like the same drawer liner I use. You don't need to adhere it. I had it in there for so long that I just decided to make it sorta-kinda more...
I dunno, I kind of have my drawer liner glued to the silver mesh. :) (moar damping?)
OK, thanks. This is one reason I use some drawer liner under the front foam. Very slightly more bass, very slightly smoother treble. Problem is if...
...driver. Don't remove the front plastic spider. Not worth it. Drawer liner under front foam (with quarter hole): Helps reduce a bit of glare on...
...today. 1. Back foam removed 2. Front hole cutout in foam 3. Drawer liner adhered to front of silver mesh with center hole cutout 4. Lots of...
...in place helps further, as will damping. You can also try the drawer liner addition I suggested earlier if you want a bit more smoothness. Air...
...thinking, yeah, I could see some feeling that way. A thinner drawer liner or other material would work. That's the cool thing, is you can...
...front foam (size of open spot in front of driver) 2. Layer of drawer liner underneath the front foam, cut to size so it only covers the silver...
...same thing Marv did, but without Dynamat (yet) and with some drawer liner in front of the silver mesh and under the foam. Oh, and the head...
Separate names with a comma.