Musical Paradise MP301mk3 mods

Any chance we could see some part numbers for the above components? The last one is the one that I have having a hard time understanding where they go, the .22 Mundorf Supremes. Are they available on digikey and or mouser?

 

It's been 6 years since I did these mods and the amp was sold a year or two later and my memory is completely useless to begin with . I highly suggest reading the full thread I linked in the initial post. The guys who came up with the mods know volumes more than I do, and there has been some debate as to the best implementation. I think the recommended mods have changed since I did this and I think I even reversed some on the mods later and didn't document them here. Sorry to be of little help, but feel free to message if you run into trouble after reading the thread on CAM:
http://www.canuckaudiomart.com/forum/viewtopic.php?f=23&t=45210

Edit: I think you can start at page 3 of that thread, as the earlier posts are about earlier revisions of the amp.

 

Ha, no worries at all and I figured I would respond to the thread here as its more of a step by step. Do you by chance have any comments on the pads as to why they are in front of the cap ? Is that just the other capacitor above it feet?

 

Sorry missed that part, those are the solder points for the cap on the flip side of the board. I think it was easier to remove the two caps first, and then the one on the other side.