Comments on Profile Post by dmckean44

  1. dmckean44
    dmckean44
    Both the "C128dp Linear Phase NYQUIST" and the NOS filter give me the holographic 3d thing I'm used to with the Schiit DACs.
    Jan 17, 2018
  2. dmckean44
    dmckean44
    Jan 17, 2018
    randytsuch likes this.
  3. insidious meme
    insidious meme
    Kinda digging the rolling filters on the soekris and rme dacs. There are others but these ones I know of.
    Jan 17, 2018
    dmckean44 likes this.
  4. Cellist88
    Cellist88
    Hmm care to share? its all a bit convoluted so I wouldn't mind help as well.
    Jan 17, 2018
  5. dmckean44
    dmckean44
    @Cellist88 Buy the EZSync FTDI serial cable off Amazon, jumpers are at J8 on 1541 board and @randytsuch's link to instructions are on page 10 of the Soekris thread. If you need more help, ask me.
    Jan 17, 2018
  6. Cellist88
    Cellist88
    can you find me the specific one you used....there are many options on amazon so a link would be helpful.
    Jan 30, 2018
  7. dmckean44
  8. dmckean44
    dmckean44
    There's three pins on the Soekris board for ground, send (TDX) and receive (RDX). You need to connect these in null modem configuration so the TDX connector on the cable connects to the RDX on the board and the RDX connector on the cable connects to the TDX on the board.
    Jan 30, 2018
  9. Cellist88
    Cellist88
    I got quite far but the filterpack won't play. I think my Umanager version is 1.14 and all filter pack verions are 1.06. I download the filter pack, but nothing plays. I type F4 and it doesn't work
    Feb 7, 2018
  10. dmckean44
    dmckean44
    Anything for .99 and newer should work, which filter pack did you load? What's the name of the .skr file you used?
    Feb 7, 2018
  11. Cellist88
    Cellist88
    1021filt.106.txt ....that's the unzipped oneoclockfilter. Do i rename it to .skr extension?
    Feb 7, 2018
  12. dmckean44
    dmckean44
    No, you need to use an .skr file. In my review of the Soekris dac I have the links to the two places you can download them.
    Feb 7, 2018
  13. dmckean44
    dmckean44
    You can generate an .skr file using the txt files with mkrom.exe, but it's easier just to download the .skr files that Paul or oneoclock have already made.
    Feb 7, 2018
  14. Cellist88
    Cellist88
    I downloaded from the second link from DIYaudio. That zip file, once extracted...yields a txt file
    Feb 7, 2018
  15. dmckean44
  16. Cellist88
    Cellist88
    is that the whole filter pack? or just nos?
    Feb 7, 2018
  17. dmckean44
    dmckean44
    Shoot, I'm not sure now. I have to figure out where I orginally downloaded it.
    Feb 7, 2018