1.     Don't be a dotard!
    Read these "rules" AND introduce
    yourself     before your first post
  2. A healthy approach to understanding measurements
    Being true to what the artists intended
  3. After being asked for the 308th time, Merv lists top 5 headphones
    (opinion / entertainment piece)
    Dismiss Notice
  4. $1000 to the first to design a headamp using discrete components with better measurements than Magni 3+
    Dismiss Notice
IMPORTANT: New Members Read This Don't Be a Measurement Fascist Merv's Top 5 Headphones - 2023 Edition $1000 Challenge

Comments on Profile Post by spwath

  1. MrTeaRex
    MrTeaRex
    Does it go to 11?
    Nov 21, 2019
  2. skem
    skem
    Nov 21, 2019
    famish99 likes this.
  3. frenchbat
    frenchbat
    You obviously have a problem with your electrical panel
    Nov 21, 2019
  4. spwath
    spwath
    Idk, it's 300w/channel, so not crazy, but maybe it's broken or something, or our electrical system is bad. Idk...
    Nov 21, 2019
  5. Cspirou
    Cspirou
    If it's a PA amp with an SMPS power supply, they are known to have in-rush currents on power up. Normally they should be designed well enough to not be an issue, so there might be a short in there somewhere.
    Nov 22, 2019
  6. skem
    skem
    You might have arc-fault breakers, which are hair-trigger sensitive. I have one that goes whenever I turn on my vacuum. Found that t thing off the lights before turning on the vacuum solved the problem.
    Nov 22, 2019
  7. spwath
    spwath
    Yeah, there is a few things plugged into the same circuit, but not much I can do about that.
    Anything else I can do? Doesn't always seem to blow it, but mostly it does
    Nov 22, 2019