1.     Don't be a dotard!
    Read these "rules" AND introduce
    yourself     before your first post
  2. A healthy approach to understanding measurements
    Being true to what the artists intended
  3. After being asked for the 308th time, Merv lists top 5 headphones
    (opinion / entertainment piece)
    Dismiss Notice
  4. $1000 to the first to design a headamp using discrete components with better measurements than Magni 3+
    Dismiss Notice
IMPORTANT: New Members Read This Don't Be a Measurement Fascist Merv's Top 5 Headphones - 2023 Edition $1000 Challenge

Comments on Profile Post by TheIceman93

  1. TheIceman93
    TheIceman93
    I just received some XLR interconnects that have well built but unbranded connectors. The female side rattles like something is loose inside. Nothing appears loose when I open up the connector. It's also not the latch. It rattles even when the latch is fully depressed.
    Jul 3, 2020
  2. fraggler
    fraggler
    Could be the ground tab if you have one.
    Jul 3, 2020
  3. TheIceman93
    TheIceman93
    Found it. Its pin #1. It looks like it's designed to move a little forward and back while the other two pins are stationary. Interesting.
    Jul 3, 2020
  4. Claritas
    Claritas
    Sounds like that's question for a gynaecologist.
    Jul 8, 2020
    TheIceman93 likes this.