In my case I'm getting more noise on the new adapter and what initially sounds like some loss of detail / haze. I took it apart and the soldering are clean, nothing shorts out per DMM, etc. This is my first foray into adapters though so...
I tried one other one that as far as I can tell didn't introduce noise or haze originally from @m17xr2b. But yes, the 2nd one I'm trying now introduces a fair amount of noise. I didn't think adding a few small wires between the pins of a tube and the socket would introduce as much noise as it did.
Noise in adaptors is a new one for me, two causes I can think of for just general noise in an input:
-dirty pins on tubes or adaptor
-cold solder in one of the wires
Read these "rules" AND introduce
yourself before your first post
Being true to what the artists intended
(opinion / entertainment piece)
Comments on Profile Post by penguins