2x4 with holes to accommodate the total pin diameter of each tube, an inch or so. in size. I stored quite a few that way putting the board up high on closet shelf. Or you could just use mini bubble wrap and tape. And if that is not feasible, low cut worn out athletic socks double thickness, haha.
one of the more clever ideas i've seen is to take 35mm film plastic canisters and poke holes in the cap for the tube pins, push the pins through the cap then pop the plastic canister over the tube.
Read these "rules" AND introduce
yourself before your first post
Being true to what the artists intended
(opinion / entertainment piece)
Comments on Profile Post by caute