I'm liking this grease. With some tweaking the lowing action is now nice and smooth. After playing around with different combos this it what I've...
TBD. I'll try them all out. It is easily reversible. I'll post thoughts on this mod.
It didn't dampen the action enough. Only a small improvement.
I have a good feeling a light coating of this will do the trick. SIG 3000 that I tried earlier is pretty darn viscous.
This is what I wound up ordering, Nyogel 767S....
Thanks, I'm going to give Nyogel 774L a try.
I lubed mine with Super Impact Grease. That helped a little but it is not a real solution....
These are what I used. PM me your address and I'll mail you some if you want.
Sounds very promising, please keep us in the loop.
Sorry for the confusing pic. This is probably a better one.
I posted this on another site. I can mail you some if you want to give it a try.
The Sol is on a 2" maple butcher block isolated with Isolate IT Sorbothane from the wood 4 drawer file cabinet below. The motor assembly now...
My Nagaoka MP-110 has hum during silent passages at loud volume. I read that it might be cartridge specific issue.
Mine has a little. I asked and they said it was normal.
I see no reason 4-40 spikes wouldn't work even better. I just happened to have the standoffs on hand.
Here is what I did.
Schiit Sol- The Next Great Turntable?
The Sol is now ready for prime time. Jason said spare arms will be available soon.
Jason recently said it will be February. Just waiting on final version mats.
I'm thinking it won't slow production of existing LP's. Lacquers are used in the process of make new records. Once a record is in production they...
It goes between the Sol bottom base and the module where you turn it on and off. Connecting the grounds of each together. There are two screws I...
Separate names with a comma.