1.     Don't be a dotard!
    Read these "rules" AND introduce
    yourself     before your first post
  2. A healthy approach to understanding measurements
    Being true to what the artists intended
  3. After being asked for the 308th time, Merv lists top 5 headphones
    (opinion / entertainment piece)
    Dismiss Notice
  4. $1000 to the first to design a headamp using discrete components with better measurements than Magni 3+
    Dismiss Notice
IMPORTANT: New Members Read This Don't Be a Measurement Fascist Merv's Top 5 Headphones - 2023 Edition $1000 Challenge

Felt/foam mods for wave-guiding

Discussion in 'Modifications and Tweaks' started by paras1te, Dec 29, 2015.

  1. paras1te

    paras1te New

    Banned
    Joined:
    Dec 14, 2015
    Likes Received:
    5
    Trophy Points:
    8
    Has anyone experimented with "contouring" that central donut hole in various mods of that element...

    This, eg., has been posted for the AKG felt mod:
    [​IMG]

    I presently use only a DIY single-layer 2mm-thick felt donut, replacing the orig. stock foam unit -- that's a worthwhile mod!
    [​IMG]

    I did not like ...
    [​IMG]

    What I had in mind was something more like what certain loudspeakers' HF drivers use (bottom: Signet 260 from the 1980s)...
    [​IMG]

    Anyone try this on their AKG, Senns, Beyers, etc?
     
    Last edited: Dec 29, 2015
    paras1te, Dec 29, 2015
    #1

Share This Page