yeah, one option is to get the chassis upgrade, let Schiit know of the transformer hum and get the boards at the same time. Exchanging them back...
They're two different units. The A2 is an older unit.
One issue is that I have some transformer mechanical hum in the A2. Would nylon bolts help here?
If I order a MIB, should I replace the A2 or LIM? LIM has great synergy in my speaker system, but I've had a hard time making the A2 work
The Mullard f32 (with the 4 notches) are no doubt excellent tubes but I find them a little surgical. I prefer the f33 rectifiers (usually marked...
I built the converter with WE111c transformers. I prefer using them with the LIM over SE. I haven’t compared the LIM with other transformers but...
I have the original Vali 2. I can sell it or mod it. Are there by recaps or mods folks tried?
I have unit #4 and it’s been solid.
I know the LIM's SE outputs aren't gimped, but I've been listening to the LIM through XLR -> WE111C for a while now (these). Not only does it...
The new Genalex GZ34 is a good tube.
The skoll is fantastic. Been too busy at work to write up my thoughts. Using it with the shibata AT
I wanted to respond to this but looks like Chris Cables profile has been deleted. @Bina sorry you have to deal with this crap.
Not sure where you are but happy to help. Feel free to DM me.
I have the 8xx so probably not so relevant, but I found good synergy with Studio B + EML300B (regular) + Bendix + Gungnir A2 + ET3.
These are the regular. I’ve had these since 2015 and used them on and off until they found their place here. I measured them recently and iirc...
Separate names with a comma.