Ultimate Ears Reference In Ear Monitor UERM Measurements

Discussion in 'IEM Measurements' started by purr1n, May 14, 2016.

  1. purr1n

    purr1n Desire for betterer is endless.

    Staff Member Pyrate BWC
    Joined:
    Sep 24, 2015
    Likes Received:
    89,957
    Trophy Points:
    113
    Location:
    Padre Island CC TX
    Ultimate Ears Reference In Ear Reference Monitor (UERM) Measurements

    Posting these because so many members have them and because they are good reference. I am also going to start providing impedance graphs for IEMs because this is something that is very crucial.

    Ultimate Ears Reference In Ear Reference Monitor (UERM) Frequency Response (0db REL = 100db SPL)
    UERM FR.png
    Resonant peak near 10k is a measurement artifact caused by the coupler. Take anything after 8-9kHz with a grain of salt because of the limitations of the coupler.

    Ultimate Ears Reference In Ear Reference Monitor (UERM) Distortion (at above FR levels)

    [DEFUNCT]

    Ultimate Ears Reference In Ear Reference Monitor (UERM) Impedance and Phase (electrical)
    UERM Z.png

    Note: There is a 20 degree phase shift at 20kHz (starting at 10kHz) and 10% impedance roll off at 20Hz (starting at 50Hz) inherent with the impedance measurement apparatus. When I have more time, I'll build a proper system for this measurement; but the current results should still give us the gist of things.
     

    Attached Files:

    Last edited: Aug 23, 2016

Share This Page