I don't think i've seen any, but the new chassis uses the slide-on (for her pleasure) top case work. On Freya, it helped to use a big spudger (like for automotive interior panels) to gently pry the top case work forward along the slides.
You'll need to contend with the ribbon cable attached to the front panel board like in the old Yggdrasil chassis, but still should be easier to get to and work with than it was in old Yggdrasil. Just sort of slides off and on its pinout on the board.
Like I said in the reply to him, I don't think the dipswitches on the LIM boards really do anything, but you can set the one for the right channel to "right" and left to left if you want just to be sure.
also, if you don't have a spudger/pry tool, try placing the DAC upside down on something soft but grippy, like cushioned shelf liner (a la SBAF shelf liner HD800 mods), and with the front facing you, grab the bottom casework and push away from yourself with downward pressure on the case.
Read these "rules" AND introduce
yourself before your first post
Being true to what the artists intended
(opinion / entertainment piece)
Comments on Profile Post by Merrick