3D printed headphones for 50mm dynamic drivers or smaller- the Ripple modular v1 headphones

Discussion in 'Headphones' started by frank2908, Mar 15, 2019.

  1. frank2908

    frank2908 Rando

    Joined:
    Sep 1, 2016
    Likes Received:
    36
    Trophy Points:
    13
    Location:
    Germany
    I made these 3d printed headphones using 50mm dynamic drivers. The design is a revolution of different design I made for my 3d printed headphones with HD800 driver. It is inspired by the Sony R10 headphones and the B&W Nautilus speakers.
    Atm, I fit these with 50mm Beryllium driver from Aliexpress with good results. With the modular different drivers can be modded and sounds can be tuned easily.
    https://cults3d.com/en/3d-model/gadget/headphones-ho0angle
    ASSEMBLY INSTRUCTION
    https://1drv.ms/w/s!AtM2_CepKCiLhMd8Z3pgq4VK63_U4A


    • fit any round 50mm dynamic driver or smaller (adapter design coming soon)
    • magnet attachment earpads, design to fit any aftermarket earpads with lip design. If you have multiple earpads, swapping take less than 1 seconds
    • Holes or bass ports on cups
    • Distance between driver and earpads is adjustable, and material between earpads and driver can be changed to adjust bass and soundstage
    • Driver angled at 20 degree and position towards the front
    I'm designing new headbands for these in plastic. atm I'm using them with different steel headbands.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    So far I fitted the 50mm 540 ohm Beryllium driver and 50mm 32 ohm K100 driver, both from Aliexpress. The Beryllium sounds much faster and more detail, smooth, but less bass than the K100
    [​IMG]
     
    Last edited: Mar 15, 2019
  2. frank2908

    frank2908 Rando

    Joined:
    Sep 1, 2016
    Likes Received:
    36
    Trophy Points:
    13
    Location:
    Germany
    This design comes to life after many previous projects with sfi driver, Fostex t50rp driver, HD800 driver
    3d printed hd800
    [​IMG]
    Wooden hd800 with brass leaf iris door (for converting open/ close)
    [​IMG]
    [​IMG]
    [​IMG]
    Open 3d printed hd800
    [​IMG]
    [​IMG]
    Closed wooden hd800 and aluminum fostex T50rp
    [​IMG]
    So far there is yet a headphones allow people to mod dynamic drivers yet, so enjoy.
     
  3. Jinxy245

    Jinxy245 Vegan Puss

    Friend
    Joined:
    Nov 17, 2016
    Likes Received:
    4,675
    Trophy Points:
    113
    Location:
    Montgomery, New York
  4. Cspirou

    Cspirou They call me Sparky

    Friend
    Joined:
    Sep 27, 2015
    Likes Received:
    7,318
    Trophy Points:
    113
    Location:
    Northwest France
    That iris looks pretty sick
     
  5. frank2908

    frank2908 Rando

    Joined:
    Sep 1, 2016
    Likes Received:
    36
    Trophy Points:
    13
    Location:
    Germany
  6. Walderstorn

    Walderstorn Friend

    Friend
    Joined:
    Mar 20, 2016
    Likes Received:
    1,513
    Trophy Points:
    113
    Location:
    Europe
    I second this. Where did you get them from @frank2908?
     
  7. frank2908

    frank2908 Rando

    Joined:
    Sep 1, 2016
    Likes Received:
    36
    Trophy Points:
    13
    Location:
    Germany
    I made them myself.I bought the 0.1mm brass sheet from aliexpress, then cut to shape, soldered the 2mm brass pin to them and voila
    And the itheo parts are 3d printed
     

Share This Page