1.     Don't be a dotard!
    Read these "rules" AND introduce
    yourself     before your first post
  2. A healthy approach to understanding measurements
    Being true to what the artists intended
  3. After being asked for the 308th time, Merv lists top 5 headphones
    (opinion / entertainment piece)
    Dismiss Notice
  4. $1000 to the first to design a headamp using discrete components with better measurements than Magni 3+
    Dismiss Notice
IMPORTANT: New Members Read This Don't Be a Measurement Fascist Merv's Top 5 Headphones - 2023 Edition $1000 Challenge

diy

Page 2 of 4
  1. frank2908
    Thread

    3D printed headphones for 50mm dynamic drivers or smaller- the Ripple modular v1 headphones

    I made these 3d printed headphones using 50mm dynamic drivers. The design is a revolution of different design I made for my 3d printed headphones...
    Thread by: frank2908, Mar 15, 2019, 6 replies, in forum: Headphones
  2. ultrabike
    Thread

    A Sensitive Speaker

    I was not sure where to put this since I have no current intention to build this. But you never know. If anything, it serves as a way to document...
    Thread by: ultrabike, Mar 1, 2019, 43 replies, in forum: DIY
  3. OJneg
    Thread

    Free stuff

    3U Chassis. Purchased from DIYaudio.com a while back, but never used. 10mm Alu faceplate. Just pay shipping. Must ship this week. --- Theta...
    Thread by: OJneg, Feb 24, 2019, 7 replies, in forum: Closed (Archived) Sales
  4. OJneg
    Thread

    Brainstorming 3-way design with simple crossovers

    Currently have the Titan 615LX. Something that is cool about the speaker is that I could potentially swap out mid-tweeter units for something...
    Thread by: OJneg, Jan 28, 2019, 6 replies, in forum: DIY
  5. OJneg
    Thread

    FS: Assorted speaker gear

    Acoustic Elegance Dipole15 woofer (x2): Specs here. These are very high quality woofers. I wish I didn't have to sell them but I do not foresee...
    Thread by: OJneg, Dec 26, 2018, 9 replies, in forum: Closed (Archived) Sales
  6. willsw
    Thread

    Eitr + Wyrd + Custom 6V AC for either

    Nothing available anymore. As my system falls to pieces because of irresponsibility, rent, and other fun things, I've decided to simplify the...
    Thread by: willsw, Nov 4, 2018, 4 replies, in forum: Closed (Archived) Sales
  7. jpoyarzun
    Thread

    Speakers & Amps built in Chile

    Hi Guys! I'll tell you some of my backstory with audio: After a while learning, chatting with some really good engineers that were super kind and...
    Thread by: jpoyarzun, Nov 3, 2018, 3 replies, in forum: DIY
  8. highflyin9
    Thread

    KORG NuTube Portable Amp Kit

    Pete Millett has the latest Korg NuTube Portable Kit from Japan. I did a review at Pete's request but wanted to share here as well just in case...
    Thread by: highflyin9, Oct 31, 2018, 12 replies, in forum: DIY
  9. ultrabike
    Thread

    Small Power Supplies

    Alright. I bought this thingy for my 2i2:...
    Thread by: ultrabike, Aug 2, 2018, 18 replies, in forum: DIY
  10. philipmorgan
    Thread

    Budget-ish 1.4/1.5" horn drivers

    I'm shopping for some 1.4/1.5" 4-bolt horn drivers for these Faital LTH142 horns I picked up on the cheap. I had a false start with some BMS 4555...
    Thread by: philipmorgan, Jul 20, 2018, 12 replies, in forum: Speakers
  11. abernardi
    Thread

    WTB: Furutech Evolution II Interconnects Used or DIY on the cheap

    I'm looking for ONE (1) pair RCA - RCA Furutech Evolution II interconnects and TWO (2) pairs of the same type interconnects but but with RCA - XLR...
    Thread by: abernardi, Jun 14, 2018, 1 replies, in forum: Closed (Archived) Sales
  12. Arun Kumar
    Thread

    Sapphire V4 impressions

    To make my preference clear, I like a warm (tending darkish) sound. If the sound is too bright and especially etchy I find it too painful. I...
    Thread by: Arun Kumar, Mar 11, 2018, 4 replies, in forum: Headphone Amplifiers and Combo (DAC/Amp) Units
  13. ultrabike
    Thread

    USM-2 DIY Speakers (ND91-4 + ND16FA-6)

    Background I've been intrigued by the ND91-4 for quite a while (years). It's a 3 1/2" driver with an Fs of 74 Hz, a Va of 0.05 cubic feet, and a...
    Thread by: ultrabike, Nov 26, 2017, 96 replies, in forum: DIY
  14. Frenchi
    Thread

    EQing Headphone membrane

    Hi all! seeking for some tip on how to EQ headphones As I am building a headphone startup, I would like to know the easiest way to EQ a pair of...
    Thread by: Frenchi, Jul 18, 2017, 15 replies, in forum: Headphones
  15. Jeb
    Thread

    ScanSpeak Discovery 18 DIY (Troels Gravesen)

    I decided to build these - http://www.troelsgravesen.dk/DiscoveryW18.htm. Reasons for the choice were: 1) The mini 4" ScanSpeak driver I tried...
    Thread by: Jeb, May 16, 2017, 18 replies, in forum: Speakers
  16. Serious
    Thread

    My real OB speaker project

    Quick timeline breakdown: Imgur Album Cheap test: Fostex FE83En Phase 0 (single woofer test): from March 2017 on -too high a listening position,...
    Thread by: Serious, Mar 13, 2017, 80 replies, in forum: Speakers
  17. thegunner100
    Thread

    An afternoon in DIY e-stat land

    @Cradon invited me to bring my Yggdrasil and go with him to Kerry's place today to listen to his Stax setups. Unfortunately we couldn't get a pair of...
    Thread by: thegunner100, Feb 12, 2017, 17 replies, in forum: DIY
  18. Jeb
    Thread

    Jeb's Overnight Sensation Build/Impressions/Measurements thread

    I’ve wanted to build these for a while. To cut right to it – for the small outlay of cash - the OSMTS are legit & I cannot speak highly enough of...
    Thread by: Jeb, Feb 1, 2017, 16 replies, in forum: Speakers
  19. SHAWN P. WATSON
    Thread

    DIY PVC HEADPHONE STAND:

    [IMG] This piano finish took some time to get right. All the PVC pipe fittings were purchased at the local box store. One could stack these...
    Thread by: SHAWN P. WATSON, Oct 24, 2016, 0 replies, in forum: DIY
  20. Josh
    Thread

    DIY Overnight Sensations & X-LS Encore (upgraded)

    Hey Everyone, Background Recently I got back into diy audio after a few years off the wagon. My background in audio like many young people...
    Thread by: Josh, Sep 27, 2016, 8 replies, in forum: DIY
Showing results 21 to 40 of 74
Page 2 of 4